Construction sites for bridges, roads and all types of infrastructure require regular measurements to check if the project is being done correctly. But not only during the construction phase, but also earlier, in the planning phase, and later, during final checks and maintenance work, 3D measurement is a necessity.
With 2Freedom Scanner V1.0, measurements can be carried out very quickly and accurately by unskilled personnel, due to the simplicity of the instrument’s operation.
BRIDGE QUICK CHECK
In the previous video you can see a 3D model generated with 2Freedom scanner with a capture of only 4 minutes. This case could be an example of an infrastructure capture made quickly to make a plan and a budget for the installation of water pipes.
FACILITIES MAINTENANCE
All installations need to be checked on a regular basis and thanks to the 2Freedom V1.0 scanner, accurate 3D documentation with high resolution textures is possible. The flexibility of the scanner allows the use of poles to capture high areas, the scanner can be zoomed in, zoomed out, zoomed up, zoomed down and zoomed sideways, making it an ideal tool to minimise the number of hidden areas.
Scanning facilities with 2Freedom V1.0 can be very useful for planning facility upgrades, installing new machines, virtually reproducing factory procedures and helping to optimise them, etc.
FRIENDLY PROCESS
Data processing, once the scanning has been carried out, is extremely simple, as the procedure for generating the 3D model is fully automatic. The process for measurements, calculation of surfaces, volumes, plans, phase comparison, etc, is also very simple and is fully documented. In addition, you have very close support from specialists who know your work and have experience in similar projects.
MORE THINGS YOU CAN
DO WITH 2FREEDOM V1.0
Indoor environment must be well illuminated and have non homogeneous walls.
Reflective surfaces should be avoided.
Want to know more?
Contact us
